TDS Water And Temperature Meter (Model: TDS-3)

TDS Water And Temperature Meter

Specification

  • - Range: 0~9990ppm

  •             0~99°C

  •             32~212°F

  • - Accuracy: 2% Full Scale     

  •                 ±1°C; ±2°F

  • - Calibration: Factory Calibrated
  • - Auto Shut-Off: 10 minutes

  • - Temperature Compensation: Automatic
  • - Operating Temperature: 0°C to 50°C

  • - Power Source: 2 x 1.5V (button cell)
  • - Size: 156x30x20mm

  • - Weight: 50g

 

Operating Instruction

  • Remove the protective cap.

  • Press the ON/OFF button once out of the water.

  • The tester will read “000”

  • Immerse the tester into the water no more than 2 inches.

  • Wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes (10-30seconds), press the HOLD button to view out of the water.

  • Press the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.

  • After usage, shake off the water from your tester or wipe it with a tissue.

  • Note:     If the tester displays a flashing “X10” icon, multiply the reading by 10.

TDS Water And Temperature Meter

TDS Water And Temperature Meter

TDS Water And Temperature Meter

TDS Water And Temperature Meter